Alternate clip for 2.5inch Three Jaw Chuck
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The circlip that came with the original design (https://www.thingiverse.com/thing:2670620) had a habit of getting…
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 137
- Wydruki
- 2
- Wyświetlenia
- 920
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
The circlip that came with the original design (https://www.thingiverse.com/thing:2670620) had a habit of getting pushed out of position when tightening he jaws. So I designed this alternate part that can be tightened in place to keep the scroll plate from moving backwards. The clip has a ridge** that goes into the existing groove of the original model.
This design requires an M4x16 screw (preferably Allen key) and an M4 nut.
** It is intentional an not an elephant foot printing defect!
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0.32
Infill:
25%
Filament: Any PLA Any
Category: Machine Tools