1 / 8
PIR portable Alarm for Fishing, Camping or more! — zdjęcie 1
1 / 8

PIR portable Alarm for Fishing, Camping or more!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

very portable and compact PIR Alarm. can be used to warn you in case somebody or an animal enter your territory!

Ocena
0 / 5
Polubienia
31
Pobrania
56
Wydruki
0
Wyświetlenia
1296
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Video: https://youtu.be/m-AhK6Sv75c

this is a PIR alarm inspired by product sold for fishing or camping.
it will alert you with sound and flashing LED lights.
powered by a 9V battery it is portable and independent from other things.
included is a file to print a universal adapter to be glued on the back, it accept a 8mm rod, strap(2cm wide) or a cord/rope up to 5mm.

this can be installed at your back when you are fishing to warn you of something coming close, or to warn in case of a thief coming when you are sleeping. very practical for fishing or camping in remote place.

this item is designed for those component:
-digispark ATTINY85 USB module (or other small arduino)
-9V battery + connector
-round power switch
-PIR module
-piezo buzzer (12mm)
-1 powerful 5mm led installed on the back side

note: Version 3 has only 1indicator LED and no more "Power" led. this is to reduce the clutter inside. i also extended the bottom 10mm so you can use a battery connector on a dangling wire instead of trying to install and glue a connector far away inside the case. my prototype V1 with 2led and a "power" led took me 5hours to assemble. it was very had to try and cram everything inside. V3 should be much better and versatile.

arduino code:

//pin
const int buzzerPin = 2;
const int ledPin = 1;
const int motionPin = 0;
int sensorValue = LOW;

void setup()
{
pinMode(ledPin,OUTPUT);
pinMode(buzzerPin,OUTPUT);
pinMode(motionPin,INPUT);;
digitalWrite(ledPin, LOW);
digitalWrite(buzzerPin, LOW);
}

void loop()
{
sensorValue = digitalRead(motionPin);
if ( sensorValue == HIGH) {
tone(buzzerPin, 1200);
digitalWrite(ledPin, HIGH);
delay(100);
noTone(buzzerPin);
digitalWrite(ledPin, LOW);
delay(100);
}
else {
noTone(buzzerPin);
digitalWrite(ledPin, LOW);
}
}

Tagi