PIR portable Alarm for Fishing, Camping or more!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
very portable and compact PIR Alarm. can be used to warn you in case somebody or an animal enter your territory!
- Rating
- 0 / 5
- Likes
- 31
- Downloads
- 56
- Makes
- 0
- Views
- 1,293
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
Video: https://youtu.be/m-AhK6Sv75c
this is a PIR alarm inspired by product sold for fishing or camping.
it will alert you with sound and flashing LED lights.
powered by a 9V battery it is portable and independent from other things.
included is a file to print a universal adapter to be glued on the back, it accept a 8mm rod, strap(2cm wide) or a cord/rope up to 5mm.
this can be installed at your back when you are fishing to warn you of something coming close, or to warn in case of a thief coming when you are sleeping. very practical for fishing or camping in remote place.
this item is designed for those component:
-digispark ATTINY85 USB module (or other small arduino)
-9V battery + connector
-round power switch
-PIR module
-piezo buzzer (12mm)
-1 powerful 5mm led installed on the back side
note: Version 3 has only 1indicator LED and no more "Power" led. this is to reduce the clutter inside. i also extended the bottom 10mm so you can use a battery connector on a dangling wire instead of trying to install and glue a connector far away inside the case. my prototype V1 with 2led and a "power" led took me 5hours to assemble. it was very had to try and cram everything inside. V3 should be much better and versatile.
arduino code:
//pin
const int buzzerPin = 2;
const int ledPin = 1;
const int motionPin = 0;
int sensorValue = LOW;
void setup()
{
pinMode(ledPin,OUTPUT);
pinMode(buzzerPin,OUTPUT);
pinMode(motionPin,INPUT);;
digitalWrite(ledPin, LOW);
digitalWrite(buzzerPin, LOW);
}
void loop()
{
sensorValue = digitalRead(motionPin);
if ( sensorValue == HIGH) {
tone(buzzerPin, 1200);
digitalWrite(ledPin, HIGH);
delay(100);
noTone(buzzerPin);
digitalWrite(ledPin, LOW);
delay(100);
}
else {
noTone(buzzerPin);
digitalWrite(ledPin, LOW);
}
}