Adjustable 5015 Hemera Shroud with PINDA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hemera fan shroud with PINDA mount. Height can now be adjusted to almost accommodate a E3D Volcano.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 358
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I wanted to use a PINDA probe with a Volcano on a Hemera. Was using just the shroud and PINDA mount from this: https://www.thingiverse.com/thing:4076234. Threw it into Fusion 360 and hacked together what I needed. The fan isn't super secure since it is only held by one screw, but it hasn't been an issue. Tthere is some sort of arm/filament sensor that I have not bothered with yet on the original thing. It is a dead work in progress, so I am not sure I ever will.
The setup sticks out quite a bit in the -Y, but you shouldn't loose any build space on i3 type machines.
I modified what I assume is the original model (https://www.thingiverse.com/thing:4031637) to be capable of working with the PINDA mount. Including that file here as well since it is useless without it.
Offsets:
- X Offset: 26
- Y Offset: -33.8
Print Settings:
- Print with PETG or something with heat resistance
- 0.2mm Layer Height
- 20% Infill
- Supports from Build Plate only