Adjustable 5015 Hemera Shroud with PINDA
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hemera fan shroud with PINDA mount. Height can now be adjusted to almost accommodate a E3D Volcano.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 30
- Makes
- 0
- Views
- 358
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
I wanted to use a PINDA probe with a Volcano on a Hemera. Was using just the shroud and PINDA mount from this: https://www.thingiverse.com/thing:4076234. Threw it into Fusion 360 and hacked together what I needed. The fan isn't super secure since it is only held by one screw, but it hasn't been an issue. Tthere is some sort of arm/filament sensor that I have not bothered with yet on the original thing. It is a dead work in progress, so I am not sure I ever will.
The setup sticks out quite a bit in the -Y, but you shouldn't loose any build space on i3 type machines.
I modified what I assume is the original model (https://www.thingiverse.com/thing:4031637) to be capable of working with the PINDA mount. Including that file here as well since it is useless without it.
Offsets:
- X Offset: 26
- Y Offset: -33.8
Print Settings:
- Print with PETG or something with heat resistance
- 0.2mm Layer Height
- 20% Infill
- Supports from Build Plate only