1 / 1
Camping chair feet for 13mm leg (decathlon MH500 ) — zdjęcie 1

Camping chair feet for 13mm leg (decathlon MH500 )

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

a replacement feet for camping chairs

Ocena
4,5 / 5
Polubienia
43
Pobrania
309
Wydruki
5
Wyświetlenia
2229
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

lost two feet of my chair in a trip, was already sinking into wet ground a bit before, found the original file and made the inner diameter smaller then removed the holes

2024/10/8 update: revisiting the file because I need to print a set for a friend, optimized such that it can be printed without support, Brim is recommended for stability, the tolerance for the center hole is a bit tighter now as machines are improved between now and the creation of the original file 
 

printed with PETG, 30% gyroid 4 wall and 8 bottom/top layer, held up to a trip on gravel ground and a night on ceramic floor, should be safe to use

other filament should work as well, PLA is not recommended

Tagi