OpenSCAD - Coin Generator, Looping Louie or 1EUR as example
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Why another design First of all thanks to Ruvy for his design. But unfortunately I had to realize that the diameter…
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 484
- Wydruki
- 3
- Wyświetlenia
- 1407
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Why another design
First of all thanks to Ruvy for his design. But unfortunately I had to realize that the diameter and thickness of his design did not correspond to the dimensions of my Looping Louie game.
That's why I created my own design using OpenSCAD, which takes the more exact dimensions into account.
When I was done with that, I adjusted the design to be able to design coins of any size.
The design comes standard with the Looping Louie coin. The attached JSON file also contains the template for a 1 euro coin, among other things.
Parameter hb_li:
The parameter applies more material to the bottom of the coin. This surcharge is intended for more material to adhere to the heatbed.
As an an example:
You want a 1mm thick coin. However, your printer is set in such a way that the Z axis is set 0.15mm "lower" for better adhesion. With the value hb_li you can take this into account without the coin becoming flatter.
Category: Toy & Game Accessories