OpenSCAD - Coin Generator, Looping Louie or 1EUR as example
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Why another design First of all thanks to Ruvy for his design. But unfortunately I had to realize that the diameter…
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 486
- Makes
- 3
- Views
- 1,414
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Why another design
First of all thanks to Ruvy for his design. But unfortunately I had to realize that the diameter and thickness of his design did not correspond to the dimensions of my Looping Louie game.
That's why I created my own design using OpenSCAD, which takes the more exact dimensions into account.
When I was done with that, I adjusted the design to be able to design coins of any size.
The design comes standard with the Looping Louie coin. The attached JSON file also contains the template for a 1 euro coin, among other things.
Parameter hb_li:
The parameter applies more material to the bottom of the coin. This surcharge is intended for more material to adhere to the heatbed.
As an an example:
You want a 1mm thick coin. However, your printer is set in such a way that the Z axis is set 0.15mm "lower" for better adhesion. With the value hb_li you can take this into account without the coin becoming flatter.
Category: Toy & Game Accessories