SmartRapCore Z-axis, 10mm rods
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Z-axis group remixed from "JetGuy Barry"from his "Core XY Cube" for use wite a box type build
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 332
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I Remixed the Z-axis group JetGuy Barry (Thingiverse) uses in his Core XY Cube which is for use in a 2020 aluminium extrusion frame type machine in such a way that it can be used in a (wooden) box type machine like the SmartRapCore printers.
The adapted parts work fine and use a 20 x 20 mm aluminium corner extrusion to support the printbed. To install these extrusions I have included some drilling templates which can be printed very quickly and help a lot to get the holes aligned. In my case I drilled 2.5 mm holes and tapped threads with a 3 mm tap to easily mount the extrusions. However drilling 3 mm holes and using nuts instead will of course also work.
The linear motion uses 10 mm rods, 4 LM10UU bearings and a TR8x8 leadscrew with a TR8x8 nut.