SmartRapCore Z-axis, 10mm rods
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Z-axis group remixed from "JetGuy Barry"from his "Core XY Cube" for use wite a box type build
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 27
- Makes
- 0
- Views
- 332
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I Remixed the Z-axis group JetGuy Barry (Thingiverse) uses in his Core XY Cube which is for use in a 2020 aluminium extrusion frame type machine in such a way that it can be used in a (wooden) box type machine like the SmartRapCore printers.
The adapted parts work fine and use a 20 x 20 mm aluminium corner extrusion to support the printbed. To install these extrusions I have included some drilling templates which can be printed very quickly and help a lot to get the holes aligned. In my case I drilled 2.5 mm holes and tapped threads with a 3 mm tap to easily mount the extrusions. However drilling 3 mm holes and using nuts instead will of course also work.
The linear motion uses 10 mm rods, 4 LM10UU bearings and a TR8x8 leadscrew with a TR8x8 nut.