TPU Printer Damper Suspension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This thingy I created for damping my Printer. I've seen the various Damper designs, but they were not looking so good.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 1317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This thingy I created for damping my Printer.
I've seen the various Damper designs, but they were not looking so good.
So I thought about using my TPU capabilties to create a Suspension Damper, like the Nitroglycerin suspensions in the past.
Futher the TPU material reduces the swinging perfectly.
Fail-Safe operation for this thing is to let the original feed down to the ground.
The shim at the top adds strength to prevent the bars to collapse the print.
The vertical opens I start to design in from now on to prevent warping. I've seen another design and it made perfectly sense: until it is required for stability, there is no long track to pull.
Print instructions
Unassociated tags: vibration Suspension
Category: Machine Tools Print Settings
Printer Brand: Anycubic
Printer: All-metal Mega
Rafts: No
Supports: No
Resolution: 0.3mm
Infill: 0%
Filament: Anycubic TPU White
Notes:
Printed using Anycubic I3 Mega-S, native TPU support.
Printed at 225 initial Layer, Bed 80°C, rest 205°C.
Retraction on.
Printed scaled to 50mm diameter