Nema 17 adapter for Planetary Gearbox from Youtuber "Let's print"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Youtuber "let's print" created a planetary gearbox system with stackable gears. This is a nema17 adapter for it.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 284
- Wydruki
- 0
- Wyświetlenia
- 1490
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
Youtuber "let's print" created a planetary gearbox system with stackable gears. In his Youtube video he said that it works with Nema17 stepper motor as well but his 3d sources on thangs.com didn't include a nema17 mount.
After some reverse engineering to get the right measurements, I have a working nema17 mount for his gearbox system.
Fusion360 and step files are included in case you want to perform any modifications. I used Fusion's user parameters to store the measurements.
Print settings
- Material: PLA or ABS (tested both)
- Infill: 20%
- Layer height: 0.2mm
- Support: Yes
Parts
- 4x M3x15mm (10mm or 12mm should do it too)
- 4x M3 washers
Enjoy!