Apple TV remote Siri button blocker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Whenever I pick up the Apple TV remote I accidentally hit the Siri button. This prevents that from happening.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 130
- Wydruki
- 6
- Wyświetlenia
- 1726
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a (slide on part) that blocks the Siri button and is held on by friction. No glue, tape or screws needed. It's designed to slide over the remote and block the Siri button.
How to use this:
One of the inside edges has a groove. That groove fits around the Siri button. Make sure you slide the side with the groove over the side of your remote where the Siri button is.
Material:
Can be printed in PLA or PETG, it works in both
Resolution:
.15 or .20 works fine.
Infill:
100%
How to orient on the build plate:
If you look straight down onto your printer from the sky. Orient the part so it looks like the letter C.
Supports:
No supports are needed.
Versions:
There are two versions, [tight] and [very tight]. I had to make a version that was very tight because for fun, I found myself sliding the part around on the remote. I make a snugger version so it's much harder to move once placed.
Permission to use:
Talk to me first if you want to sell it.