MDD V1.3 Hemera adapter plate with BLTouch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adaptation of Printermods.com MDD v1.2 Hemera adapter for the MDD v1.3. update 1/2/21 Added a cable…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is an adaptation of Printermods.com MDD v1.2 Hemera adapter for the MDD v1.3.
update 1/2/21
Added a cable holder/strain relief to the adapter plate. I also changed the haxagonal holes for the nuts to be 0.05mm smaller to make them press fit tight.
Update 1/10/21
I have added and X-Axis endstop that is a modified version of the one designed by Pritner Mods. This one puts the nozzle very near the edge of the bed, within a couple of millimeters.
I have included STL for a part cooling duct and mount. It uses the parts from https://www.thingiverse.com/thing:4042492 (Hemera V6/ Volcano Part Cooling Duct & Mount) it has been mirrored as it was originally designed for a Hemera mounted in a different orientation.
Update 1/11/21
The NOZZLE_TO_PROBE_OFFSET I am using is X-60 Y+10, the Z is specific to your printer.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.12
Infill:
15%
Filament: ANY PLA ANY
Category: 3D Printing