MDD V1.3 Hemera adapter plate with BLTouch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adaptation of Printermods.com MDD v1.2 Hemera adapter for the MDD v1.3. update 1/2/21 Added a cable…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 0
- Views
- 188
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is an adaptation of Printermods.com MDD v1.2 Hemera adapter for the MDD v1.3.
update 1/2/21
Added a cable holder/strain relief to the adapter plate. I also changed the haxagonal holes for the nuts to be 0.05mm smaller to make them press fit tight.
Update 1/10/21
I have added and X-Axis endstop that is a modified version of the one designed by Pritner Mods. This one puts the nozzle very near the edge of the bed, within a couple of millimeters.
I have included STL for a part cooling duct and mount. It uses the parts from https://www.thingiverse.com/thing:4042492 (Hemera V6/ Volcano Part Cooling Duct & Mount) it has been mirrored as it was originally designed for a Hemera mounted in a different orientation.
Update 1/11/21
The NOZZLE_TO_PROBE_OFFSET I am using is X-60 Y+10, the Z is specific to your printer.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.12
Infill:
15%
Filament: ANY PLA ANY
Category: 3D Printing