1 / 2
SteamDeck Powered Dock using Anker 6-in-1 USB Hub
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dock for the SteamDeck designed to fit Anker 6-in-1 hub.
- Ocena
- 4,75 / 5
- Polubienia
- 21
- Pobrania
- 83
- Wydruki
- 3
- Wyświetlenia
- 1205
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 3) (Komentarze: 10)Remiksy (1)Kolekcje (28)Powiązane
Dock for the Steam Deck designed to fit Anker 6-in-1 hub.
Note: A 90 Degree Right Angle Type-C Male to Type-C Female Adapter is required to reach the cable to the Deck.
There is space for the two USB 3 ports in the front. A small port fits the ethernet cable on the side and out the back. All the other USB-C ports are available on the back. I've included a zip tie or twist tie channel on the back to help secure wires.
| Layer Height | .2 (I've tested with a 0.4 nozzle and 0.6 nozzles both work great) |
| Material | PETG (recommended) |
| Perimeter | 3 (recommended) |
| Infill | 10% or greater (The more you use, the heavier it gets) |
Tips:
- No supports are needed when printed from the left side. (Side without the door hole.)
- Only slide on the door after you've inserted the hub. It can be difficult to remove.
- Add some sort of rubber on the bottom to keep it from sliding. I used this stuff: https://www.amazon.com/gp/product/B00HK025OW
Links:
- Hub: https://www.anker.com/products/a8365
- Hub (Amazon): https://www.amazon.com/dp/B08C9HZ5YT
- 90 Degree Right Angle Type-C Male to Type-C Female Adapter: https://www.amazon.com/dp/B08P5HRH3Z