1 / 2
SteamDeck Powered Dock using Anker 6-in-1 USB Hub
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dock for the SteamDeck designed to fit Anker 6-in-1 hub.
- Rating
- 4.75 / 5
- Likes
- 21
- Downloads
- 83
- Makes
- 3
- Views
- 1,203
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Dock for the Steam Deck designed to fit Anker 6-in-1 hub.
Note: A 90 Degree Right Angle Type-C Male to Type-C Female Adapter is required to reach the cable to the Deck.
There is space for the two USB 3 ports in the front. A small port fits the ethernet cable on the side and out the back. All the other USB-C ports are available on the back. I've included a zip tie or twist tie channel on the back to help secure wires.
| Layer Height | .2 (I've tested with a 0.4 nozzle and 0.6 nozzles both work great) |
| Material | PETG (recommended) |
| Perimeter | 3 (recommended) |
| Infill | 10% or greater (The more you use, the heavier it gets) |
Tips:
- No supports are needed when printed from the left side. (Side without the door hole.)
- Only slide on the door after you've inserted the hub. It can be difficult to remove.
- Add some sort of rubber on the bottom to keep it from sliding. I used this stuff: https://www.amazon.com/gp/product/B00HK025OW
Links:
- Hub: https://www.anker.com/products/a8365
- Hub (Amazon): https://www.amazon.com/dp/B08C9HZ5YT
- 90 Degree Right Angle Type-C Male to Type-C Female Adapter: https://www.amazon.com/dp/B08P5HRH3Z