BMW E46 Warning Triangle Bracket (51 47 8 265 682)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redesign of original BMW part to fit a bigger hazard warning triangle box (OEM part it replaces: 51 47 8 265 682)
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 154
- Wydruki
- 0
- Wyświetlenia
- 1577
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
This is WIP
I'm still playing with the rivet (as I have split rivet and bracket to make it slightly easier to print.
Description
This is a redesign of the original BMW holder for the warning triangle that goes in the left hand side of the trunk/boot in the e46 model. It's not a “OEM” replacement as it's meant to hold a bigger box.
I printed it in Prusament ASA, but I suppose PETG would work too. I wouldn't use PLA though as it might get too hot and deform.
BMW OEM part it replaces: 51 47 8 265 682
Print settings
Printer: mk3s+
Filament: Prusament ASA
Layer height: 0.28mm
Supports: build plate only
Nozzle: 0.4mm