1 / 4
Record Cleaner Motor Holder for 6L Ultrasonic Cleaner — zdjęcie 1
1 / 4

Record Cleaner Motor Holder for 6L Ultrasonic Cleaner

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Have an Ultrasonic Cleaner and some Vinyl Records? The ultrasonic cleaner can do a great job of cleaning your records.…

Ocena
0 / 5
Polubienia
2
Pobrania
34
Wydruki
0
Wyświetlenia
637
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution

Have an Ultrasonic Cleaner and some Vinyl Records? The ultrasonic cleaner can do a great job of cleaning your records. All you need is an arbor and some discs to fasten some records to, (available on Thingiverse) a motor to turn them slowly and something to hold the motor just above the tank so as to suspend the records in your favorite cleaning solution.

This is "that something" to hold the motor to the top of the tank reduced to its simplest form. It quickly and easily clips to the top edge of a 6 Liter or larger ultrasonic cleaner and holds your record stack suspended over the tank. Featuring no clamps or setscrews, it was designed for a metal ultrasonic cleaner model DK600PF but should work on other metal-cased ultrasonic cleaners with a lip around the outer perimeter of the tank top.

The version 3 with "No Holes" lacks mounting holes so you can add your own to suit your particular motor in Prusaslicer with part modifiers, or use Fusion 360, or just print it at 100% infill and drill your own.

The version 2 has holes set for a cheap 6v / 2 rpm gear motor from eBay, model HN-35GAP-2025Y. This motor has an odd offset output shaft, below the mounting bolts centerline.

Print Settings

Printer Brand:

Prusa

Printer:

Mk2.5s

Rafts:

No

Supports:

No

Resolution:

200

Infill:

30

Filament: generic PETG

Category: Audio

Tagi