1 / 4
Mk2S - 2.5S Y-axis motor and idler mounts for Mk3 aluminum frame — zdjęcie 1
1 / 4

Mk2S - 2.5S Y-axis motor and idler mounts for Mk3 aluminum frame

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Have you upgraded your Prusa Mk2s - 2.5s to a Mk3 type frame with aluminum extrusions? If so, you will have noticed…

Ocena
0 / 5
Polubienia
1
Pobrania
17
Wydruki
0
Wyświetlenia
225
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Have you upgraded your Prusa Mk2s - 2.5s to a Mk3 type frame with aluminum extrusions?

If so, you will have noticed that the MK3 Y-axis motor mount is opposite of a Mk2s and has no limit switch. You could modify the wiring so that the Y axis stepper runs backwards but the limit switch would still be missing.

This set has two different Mk 3 Y-axis motor mounts reversed to accommodate the MK2s series and has a limit switch mount grafted on. One is extended, one not. I currently use the short version. The limit switch works correctly against the standard Mk2s series Y carriage. It is intended for the Mk3 type aluminum extrusion frame upgrade.

At the other end, the Y axis idler must be moved down slightly so that the belt will clear the Mk2s Y carriage belt mount. Two sizes are provided, "B" and "C", with "C" being lower.

These mounts are intended for use with 5mm bore idlers, as I feel that the standard 3mm bore idlers have too much wobble.

Note: The .stl files did not export correctly, so it is best to use the .3mf. The .stl files are included for reference only.

Print Settings

Printer Brand:

Prusa

Printer:

Mk2.5s

Rafts:

No

Supports:

No

Resolution:

200

Infill:

38

Filament: Prusament PETG Orange

Category: 3D Printer Parts

Tagi