Mk2S - 2.5S Y-axis motor and idler mounts for Mk3 aluminum frame
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Have you upgraded your Prusa Mk2s - 2.5s to a Mk3 type frame with aluminum extrusions? If so, you will have noticed…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 225
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Have you upgraded your Prusa Mk2s - 2.5s to a Mk3 type frame with aluminum extrusions?
If so, you will have noticed that the MK3 Y-axis motor mount is opposite of a Mk2s and has no limit switch. You could modify the wiring so that the Y axis stepper runs backwards but the limit switch would still be missing.
This set has two different Mk 3 Y-axis motor mounts reversed to accommodate the MK2s series and has a limit switch mount grafted on. One is extended, one not. I currently use the short version. The limit switch works correctly against the standard Mk2s series Y carriage. It is intended for the Mk3 type aluminum extrusion frame upgrade.
At the other end, the Y axis idler must be moved down slightly so that the belt will clear the Mk2s Y carriage belt mount. Two sizes are provided, "B" and "C", with "C" being lower.
These mounts are intended for use with 5mm bore idlers, as I feel that the standard 3mm bore idlers have too much wobble.
Note: The .stl files did not export correctly, so it is best to use the .3mf. The .stl files are included for reference only.
Print Settings
Printer Brand:
Prusa
Printer:
Mk2.5s
Rafts:
No
Supports:
No
Resolution:
200
Infill:
38
Filament: Prusament PETG Orange
Category: 3D Printer Parts