1 / 3
Sunlu S2 Mk3S Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sunlu S2 mount for the top of the MK3S. Requires 2 16mm M8 bolts to attach the tray to the mount.
- Ocena
- 4,842 / 5
- Polubienia
- 170
- Pobrania
- 797
- Wydruki
- 21
- Wyświetlenia
- 6642
- Oceny
- 19
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 21) (Komentarze: 38)Remiksy (6)Kolekcje (245)Powiązane
Sunlu S2 mount for the top of the MK3S. Requires 2x 16mm M8 bolts to attach the tray to the mount.
- Requires use of the excellent Sunlu S2 Improvement Wedge.
- Requires 2x 16mm M8 bolts to attach the tray/base to the mount. The tray's model is pre-threaded.
- Wings are optional (they just prevent the filament from getting caught-up in occasional snags). Glue them to the sides.
- Angled downwards just enough to make this application work.
- Supports are not necessary.
- PETG or ABS is recommended (though a good PLA might be fine).