1 / 3
Sunlu S2 Mk3S Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sunlu S2 mount for the top of the MK3S. Requires 2 16mm M8 bolts to attach the tray to the mount.
- Rating
- 4.842 / 5
- Likes
- 171
- Downloads
- 797
- Makes
- 21
- Views
- 6,651
- Reviews
- 19
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Sunlu S2 mount for the top of the MK3S. Requires 2x 16mm M8 bolts to attach the tray to the mount.
- Requires use of the excellent Sunlu S2 Improvement Wedge.
- Requires 2x 16mm M8 bolts to attach the tray/base to the mount. The tray's model is pre-threaded.
- Wings are optional (they just prevent the filament from getting caught-up in occasional snags). Glue them to the sides.
- Angled downwards just enough to make this application work.
- Supports are not necessary.
- PETG or ABS is recommended (though a good PLA might be fine).