Air Duster Caddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for a battery powered Air Duster and a caddy to store the accessories wall or shelf mounted versions included.
- Ocena
- 4,5 / 5
- Polubienia
- 19
- Pobrania
- 104
- Wydruki
- 1
- Wyświetlenia
- 994
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
Purchased an Air Duster from Amazon (non-affiliate link) and needed a place to store all the accessories that came in the kit. I wanted to make this slightly modular as the main holder is thin. Two different models were mocked up and produced. One model the Air Duster Caddy is a compression fit on my shelves at 19mm thick. The other model has a mountable rail and the Air Duster Caddy slides onto the rail. Both models have a replaceable clamp in which the Air Duster clips into place.
I tested and printed with PLA, 20% Support Cubic Infill and 2 perimeters.
Some supports are needed in-between the overhangs on the models and need to be adjusted accordingly for easy removal.