Piper cup air vent for PA-28
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement floor vent for a 1979 Piper Archer PA-28-181. See Also Vent Retainer:…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 921
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
If you want one of these but do not have a 3D printer contact the good folks at Ripperden Resources
This is a replacement floor vent for a 1979 Piper Archer PA-28-181.
See Also Vent Retainer: https://www.thingiverse.com/thing:4081275
V1.20200102
- fit pretty well but the dimensions were a little tight
V2.20200103
- A closer match to the original part.
- The walls are 2.5mm instead of 1mm of the original so hopefully, the part will be more durable.
V3.20200104(not tested yet)
- Model original part more closely
- Walls changed to 2mm
_
Orbit View of Part
Printed Upside Down With Support
Print Settings
Printer Brand:
Ultimaker
Printer:
S5
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
50%
Filament: Ultimaker Tough PLA Black
Notes:
This is similar to https://www.knots2u.net/cup-air-vent-piper-65735-02-65735-03-65735-04-65735-12-65735-18/
Note on "Owner Produced Parts":
https://www.faa.gov/documentlibrary/media/advisory_circular/ac%2020-62e.pdf
Category: Parts