1 / 9
ZB2L3 Case - 18650 Battery Capacity Tester Housing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple housing for the ZB2L3 battery capacity tester which contains ZB2L2, resistors, heatsink and a battery holder.
- Ocena
- 4,5 / 5
- Polubienia
- 56
- Pobrania
- 463
- Wydruki
- 2
- Wyświetlenia
- 2239
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 2) (Komentarze: 6)Remiksy (0)Kolekcje (57)Powiązane
I made a simple housing for the ZB2L3 battery capacity tester. It contains ZB2L3 circuit, resistors and the 18650 battery holder. There's also enough space to add a little heatsink block on top of the resistors.
Only "Resistor Vent. Case.stl" requires support.
Parts: (Affiliate Links)
Assembly:
- Mount the ZB2L3 circuit on top of the "Case - Bottom.stl" part.
- Mount the 18650 battery case. (With screw or glue)
- Connect the resistors and the wires of the battery case to the circuit.
- Place the "Button Caps.stl" parts in the holes inside the "Case - Top.stl" part.
- Assemble the parts "Case - Bottom.stl" and "Case - Top.stl" with 4 M3x5 screws.
- Glue the "Leg Left" and "Leg Right" parts to the back of the model.