1 / 9
ZB2L3 Case - 18650 Battery Capacity Tester Housing
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple housing for the ZB2L3 battery capacity tester which contains ZB2L2, resistors, heatsink and a battery holder.
- Rating
- 4.5 / 5
- Likes
- 56
- Downloads
- 463
- Makes
- 2
- Views
- 2,239
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I made a simple housing for the ZB2L3 battery capacity tester. It contains ZB2L3 circuit, resistors and the 18650 battery holder. There's also enough space to add a little heatsink block on top of the resistors.
Only "Resistor Vent. Case.stl" requires support.
Parts: (Affiliate Links)
Assembly:
- Mount the ZB2L3 circuit on top of the "Case - Bottom.stl" part.
- Mount the 18650 battery case. (With screw or glue)
- Connect the resistors and the wires of the battery case to the circuit.
- Place the "Button Caps.stl" parts in the holes inside the "Case - Top.stl" part.
- Assemble the parts "Case - Bottom.stl" and "Case - Top.stl" with 4 M3x5 screws.
- Glue the "Leg Left" and "Leg Right" parts to the back of the model.