1 / 11
Filament Spool Box — zdjęcie 1
1 / 11

Filament Spool Box

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A filament box to keep dust away

Ocena
5 / 5
Polubienia
78
Pobrania
321
Wydruki
1
Wyświetlenia
3762
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
GNU General Public License v2.0

This is a filament spool box base on Drybox for Prusa Printer Enclosure V2 - without humidity sensor
Drybox for Prusa Printer Enclosure V2 - without humidity sensor by Ondřej Stříteský | Download free STL model | Printables.com

I really like the design but I don't need some of it's feature, so I make one myself using the existing model feature, and added a few things to my liking.

My obsession to make things that are fully 3d printed, it might not be the strongest, suitable, or optimal application but that's what 3d printer are for.

Feature that I added in this model

  1. A window to see the inside of the box, to check how much filament left, can be covered with the widest sticky tape you have.
  2. Added 2 hole, front and back, so this box can be depending on your placement and used facing either side.
  3. Stackable, added a little notch so the box can be stacked while storing.
  4. Fully 3D print, no added material in the box (except, maybe, for the bearing, which if you are MMU2S owner, might have 1 or 4).

Detailed explanation

  1. The window is 65mm wide, the widest sticky tape that I have is 72mm
  2. There's 2 windows type in the picture, but I remove it for now to avoid bridging complication, for now
  3. It is advisable to print the roller in PETG, I print it with 0,2 mm height to increase the bonding area, and 30% infill only
  4. You can use 1,75 mm filament to secure the hinges, use pliers if it's too tight, I purposely measure the hole with “just enough” clearance to really secure the filament there, do note that it is based on my printer setting, there will be expansion or contraction base on your printer, do inform me if it's need a bit adjustment.

 

More feature and adjustment will be added in the future

Tagi