1 / 1
Snap-in V-Slot Covers and LED Diffusers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
V-Slot LED Diffuser / Channel Cover. Toolless install to cover slots for light diffusion, cable restraint or decoration.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 80
- Wydruki
- 1
- Wyświetlenia
- 613
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (22)Powiązane
V-Slot Covers / LED Diffusers / Channel Wiring Concealment
- Multiple lengths and self-supporting print options
- No supports required
- Included STEP file containing all variants for customization
- Optimized for 0.4mm nozzle
- Flush with extrusion surface
- Snug snap-in design
- Breakaway options (4pc files)
My prints are all at 0.2mm layer height in clear PETG.
Best results:
- Print in the provided vertical orientation. Printing flat is unlikely to have enough strength to snap in without breakage. Vertically, the strength is excellent. If using clear or translucent filament, clarity is excellent in vertical orientation.
- Use brim, including interior.
- No supports
- 0.4mm nozzle (walls are 0.8mm thick)
- Infill unnecessary
Printing and usage:
- Use an appropriate size for your build volume, or scale only Z in slicer to lengthen or shorten. The best options are the 4pc models, which support each other at their respective heights. Included heights are 40mm, 80mm, and 150mm
- Squeeze the print and they should separate effortlessly
- Cut to size if needed using standard wire cutters or utility knife, then press into v-slot to use as diffusion for embedded LEDs, cable management, or decoration. They should fit snug and remain secure, and are easily removed and reused.
