multi piece one wheel finger board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a remix of the "Onewheel Fingerboard (Tech Deck) (Print in Place)" where it is separated
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 622
- Wydruki
- 5
- Wyświetlenia
- 1972
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed a "Onewheel Fingerboard (Tech Deck) (Print in Place)" for a friend who loves fingerboards, and he recommended that I print one that could use bearings, and rubber wheels. I went into MeshMixer, and separated all the pieces, then fixed a few flaws inTinkercad.
I printed one with a PLA board and a TPU wheel.
VIDEO OF FINAL PRINT
https://youtube.com/shorts/1_lCWhzsleA
( when gluing the board together, I didn't put glue on the peg in the center of the wheel, to avoid any problems with the wheel getting glued.)