Door handle and button pusher with housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
During the current Corona epidemy I wanted to share my model that I have been creating to minimize contact to surfaces…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 131
- Wydruki
- 0
- Wyświetlenia
- 762
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
During the current Corona epidemy I wanted to share my model that I have been creating to minimize contact to surfaces that are touched by many people.
The design is inspired by a lot of other models I saw online. However not many had a housing so I decided to make my own.
If you finished the print add a rubber band so that the locking mechanism works.
Print instructions
The model is intended to be printed quickly with a layer height of 0.3 mm. With this setting it prints each part in approx. 1hr.
The pusher is best printed laying flat on the side. The housing upright and depending on your bed adhesion maybe with a raft.