1 / 4
Cyberpunk 2077: Makigai MaiMai P126 — zdjęcie 1
1 / 4

Cyberpunk 2077: Makigai MaiMai P126

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The objectively best car from Cyberpunk 2077!

Ocena
0 / 5
Polubienia
43
Pobrania
137
Wydruki
0
Wyświetlenia
1562
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution

The Makigai MaiMai P126 is my favorite vehicle in Cyberpunk 2077, and I think it doesn't get nearly as much love as this tiny little guy deserves.
So I modeled up a version for 3d printing, making sure it can still roll around.

Now you can have a mini version of this already tiny little vehicle wherever you want!

---------------------------------------
PRINTING:
I printed everything at 0.1mm with 3 perimeters just to make sure I got as much detail and strength as possible. You may want to do some support tweaking when slicing, to ensure all surfaces (especially on the MaiMai-Chassis-Top) get properly held up.

Parts you'll need to print multiples of are marked with a “2x” or “4x” suffix.

I printed the windows in a transparent PLA, just so you could see the inside as well.
 

---------------------------------------
POST-PROCESSING:
You may need to do a little sanding here and there to remove some of the support scarring, but other than that, she should be good to go right off the print bed.

My painting skills aren't the best, but I think the sort of rusted junkyard look felt cool.

Tagi