1 / 3
Number plate storage box — zdjęcie 1
1 / 3

Number plate storage box

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,26 € – 0,32 € netto (bez VAT)

Dla pliku: Drilling template_0.3mm_PLA_MK3S_19m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,29 € netto (środek widełek).

Masa podana przez autora
3 g
Czas druku podany przez autora
19,2 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Storage box to fit behind motorcycle number plate

Ocena
0 / 5
Polubienia
17
Pobrania
124
Wydruki
0
Wyświetlenia
1361
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Designed to carry a complete motorcycle puncture repair kit, this has the holes already in place to suit the rear of a BMW R1250GS, and most likely the R1200GS and others. 

The existing number plate screws hold it to the bike, then a template is also supplied that allows you to drill four holes in a new number plate. 

The GOM-Box has four holes pre-threaded to accept standard plastic number plate screws. Just carry a flat-bladed screwdriver for if you need to open the box, or do what I did and file down the end of the spanner in the BMW toolkit to act as a screwdriver.

DO NOT overload your GOM box. Keep the weight down as much as you can, but it seems fine with what I've put in. It's your responsibility though to ensure this is properly fixed and can't fall off.

Tagi