Number plate storage box
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.26 – €0.32 net (excluding VAT)
For file: Drilling template_0.3mm_PLA_MK3S_19m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.29 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 19.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Storage box to fit behind motorcycle number plate
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 124
- Makes
- 0
- Views
- 1,361
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Designed to carry a complete motorcycle puncture repair kit, this has the holes already in place to suit the rear of a BMW R1250GS, and most likely the R1200GS and others.
The existing number plate screws hold it to the bike, then a template is also supplied that allows you to drill four holes in a new number plate.
The GOM-Box has four holes pre-threaded to accept standard plastic number plate screws. Just carry a flat-bladed screwdriver for if you need to open the box, or do what I did and file down the end of the spanner in the BMW toolkit to act as a screwdriver.
DO NOT overload your GOM box. Keep the weight down as much as you can, but it seems fine with what I've put in. It's your responsibility though to ensure this is properly fixed and can't fall off.