1 / 3
Peloton Bike+ Phone Tray with Ball Joint — zdjęcie 1
1 / 3

Peloton Bike+ Phone Tray with Ball Joint

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I took the peloton phone tray and replaced the insets with a ball joint

Ocena
4 / 5
Polubienia
12
Pobrania
152
Wydruki
1
Wyświetlenia
1070
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Admittedly, since this is one of my first times using any kind of CAD software, I think this could be improved. 

One main issue is that because of the added ball joint, the tray would require tons of support when printed in any orientation. I was going to try to make it so the ball joint could pop into place but that's beyond my skill level right now.
 

The tray is  a little high and touches the bar but it does rotate pretty freely and can be tightened. I printed the clippy part upright and the very tippy parts of it fell off so maybe try printing that part laying down to make it stronger. IF the tips fall off, the joint will still work but not be able to be tightened to restrict motion
 

Tagi