E3D Chimera / Cyclope Dirct drive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An updated ver will be added in next few days Changes will be made to top part only, with thicker motor mount and…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 425
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
*******An updated ver will be added in next few days*******
Changes will be made to top part only, with thicker motor mount and added hinged mount for a 40mm motor cooling fan with block supports.
Direct Drive Chimera or Cyclops mount with radial fan part cooling
Use 5 mm threads plastic screws to assemble bottom and top together ( I used screws that I recycled from taking apart old TV's they are the black screws that normally hold the back covers).Use either M5 or 10/24 screws to attach the hotend mount to X carriage there is no nut trap as the screws bite firmly in to the plastic. if you have a problem I could add one.
I design to use with MK8 direct drive motors cold end found here http://www.thingiverse.com/thing:111711.
My E step at 1/16 micro stepping is 157.01
The X carriage and radial fan duct was made by Prusa research, I only modified it to fit my screws. ***UPDATES***
Also see Add-ons for this extruder here
New Parts cooling fan https://www.thingiverse.com/thing:2998675
Pen Plotter Add-on https://www.thingiverse.com/thing:3275336
Print Settings
Printer Brand:
RepRap
Printer:
Prusa I3
Rafts:
No
Supports:
No
Notes:
Print as is , you might need to add supports for top part under the tube guide
Category: 3D Printer Extruders