E3D Chimera / Cyclope Dirct drive
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An updated ver will be added in next few days Changes will be made to top part only, with thicker motor mount and…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 22
- Makes
- 0
- Views
- 425
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
*******An updated ver will be added in next few days*******
Changes will be made to top part only, with thicker motor mount and added hinged mount for a 40mm motor cooling fan with block supports.
Direct Drive Chimera or Cyclops mount with radial fan part cooling
Use 5 mm threads plastic screws to assemble bottom and top together ( I used screws that I recycled from taking apart old TV's they are the black screws that normally hold the back covers).Use either M5 or 10/24 screws to attach the hotend mount to X carriage there is no nut trap as the screws bite firmly in to the plastic. if you have a problem I could add one.
I design to use with MK8 direct drive motors cold end found here http://www.thingiverse.com/thing:111711.
My E step at 1/16 micro stepping is 157.01
The X carriage and radial fan duct was made by Prusa research, I only modified it to fit my screws. ***UPDATES***
Also see Add-ons for this extruder here
New Parts cooling fan https://www.thingiverse.com/thing:2998675
Pen Plotter Add-on https://www.thingiverse.com/thing:3275336
Print Settings
Printer Brand:
RepRap
Printer:
Prusa I3
Rafts:
No
Supports:
No
Notes:
Print as is , you might need to add supports for top part under the tube guide
Category: 3D Printer Extruders