1 / 1
Hadley Telescope Right Angle 6x30 FinderScope Mount — zdjęcie 1

Hadley Telescope Right Angle 6x30 FinderScope Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed this to fit the SVBONY SV182 6x30 Right Angle Finder Scope with the Hadley telescope.

Ocena
0 / 5
Polubienia
8
Pobrania
35
Wydruki
0
Wyświetlenia
655
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I remixed this mount to fit the SVBONY SV182 6x30 Right Angle Finder Scope I purchased to use with the Hadley telescope I printed.  I tuned the inner ring to fit snugly with the finderscope barrel above and adjusted the screws so they didn't affect the aim when snugged.  Holes fit ¼-20 and an extra bolt from the telescope build (#10-24) without the press fit from the original model unless that's your preference.  Just screw them right in.  I meant to make all the holes fit #10-24 when I moved the smaller hole, but I forgot.  Feel free to copy and paste that hole to the others in a remix if that is your preference.  I also made this to stand further out to clear the telescope hardware and strengthened the post.  It still attaches to the Hadley ½" frame with extra hardware from the build.

 

If you sourced a different Finderscope, just adjust the size of the inner ring to match the barrel of your scope and print.  Watch the overhang to avoid needing supports.

Printed without supports with 3+ perimeters and generous infill.

 

Hadley Telescope:

https://www.printables.com/model/224383-astronomical-telescope-hadley-an-easy-assembly-hig

Finder Scope listing on Amazon:

https://a.co/d/194rSSZ

Tagi