Hadley Telescope Right Angle 6x30 FinderScope Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed this to fit the SVBONY SV182 6x30 Right Angle Finder Scope with the Hadley telescope.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 35
- Makes
- 0
- Views
- 656
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial
I remixed this mount to fit the SVBONY SV182 6x30 Right Angle Finder Scope I purchased to use with the Hadley telescope I printed. I tuned the inner ring to fit snugly with the finderscope barrel above and adjusted the screws so they didn't affect the aim when snugged. Holes fit ¼-20 and an extra bolt from the telescope build (#10-24) without the press fit from the original model unless that's your preference. Just screw them right in. I meant to make all the holes fit #10-24 when I moved the smaller hole, but I forgot. Feel free to copy and paste that hole to the others in a remix if that is your preference. I also made this to stand further out to clear the telescope hardware and strengthened the post. It still attaches to the Hadley ½" frame with extra hardware from the build.
If you sourced a different Finderscope, just adjust the size of the inner ring to match the barrel of your scope and print. Watch the overhang to avoid needing supports.
Printed without supports with 3+ perimeters and generous infill.
Hadley Telescope:
https://www.printables.com/model/224383-astronomical-telescope-hadley-an-easy-assembly-hig
Finder Scope listing on Amazon:
https://a.co/d/194rSSZ