Counting matching models…
Use this to attach two things to your telescope, such as a red dot finder and a finder scope, as pictured. Marked as a remix to link to the main project. Features Two dovetail slots hold your accessories steady side-by-side Uses the same…
This a a Bahtinov mask and a holder for a 50mm Bigking Finderscope with a focal length of 190mm. Two masks are included, one is a bit more open. The outer diameter of the mask is 61mm and it might fit similar finderscopes from other…
This is straightforward. Print with 3-4 perimeters, for sturdiness (optional). This is just an align-able interface for a 6x30 finderscope to help in aiming your Hadley (or similar) telescope. I attached mine to a Fracley. Bill of…
I have designed this mounting shoe to be able to feet finder scope to my telescope. It matches the curvature of the telescope perfectly, as you can see in the pictures. Printed 4 perimeters to achieve stiffness, 25% gyroid infill on my…
Finderscope mount with shoe Very massive and stable finderscope mount for cheap chinese 70mm telescope. It is compatible with Sky-Watcher finderscope mounts. I just got this cheap chinese 70/400 telescope as junk for free. Only the tube.…
This finderscope is designed to fit Orion telescopes. The part can be printed in place with no supports by laying the back panel flat to the print bed. Use PETG filament so that the part doesn't melt in direct sunlight.
Finderscope mount for Hadley telescope, with double adjustment ring, internal diameter 29mm.
If you deforked your ETX90, you would probably want to add some accessories on it. Why not use an already existing mounting points then? This adapter fits on original fork mounting points and is held by original screws. It's symmetrical,…
I remixed this mount to fit the SVBONY SV182 6x30 Right Angle Finder Scope I purchased to use with the Hadley telescope I printed. I tuned the inner ring to fit snugly with the finderscope barrel above and adjusted the screws so they…
This is a much more robust finder scope holder than that one that comes with the telescope. Can adjust rear and front and it doesn't shake like the original. Openings for knurled screws are 2mm. you might need to adjust. There is a…
I wanted a way to mount my phone into my telescope and use it as a finderscope, with the assist of Stellarium or SkySafari apps. I already use QuadLock cases on my phone, so it made sense to use it. I have mixed two designs together, one…
Simple flat mount for Celestron Finderscopes. Good for Seestar S50 Print with 3+ walls and 30% infill for good strength Category: Tools
Print vertically with extra thicc walls. It's expected to loosly fit on the original foot, but be tightened by vixen mount screws. PETG strongly recommended because print is expected to be springy.
This is a remix of https://www.thingiverse.com/thing:699347 by MyDogJustice. I changed the holes so this base could fit a wider range of scopes and wider range of screws, so I could attach Celestron 9x50 RACI finderscope to my Meade.…
This is a replacement model for the bracket that goes on the Zhumell Z10 telescope to hold the finderscope. Despite testing the hole size for the tightening screw, after printing it turned out to be just a bit small for me. You may need…
The connection that you usually use to rotate the eyepiece in a comfortable poition has play in it, that can mess up alignment. This simple thing snaps on and adds a groove, so you can rotate the eyepiece without messing everything up.…
Converts common 12v 2.1mm DC jack to USB C PD at the eyepiece. I use it for the AstroOwl Raspberry Pi 4b astro digital camera. Box top is snap fit. When the Pegasus SmartEye gets released this spring, it should theoretically also power…
You want to attach an additional guidescope to your scope without drilling new holes? All slots are occupied? Clamps to the rescue! You can't have too many clamps on your telescope. This is very fast and easy to print clamp that can be…
let me introduce printable finderscope. lens - 40/123mm achromatic eyepiece - 20mm stock celestron (also good with 23mm aspheric ) I made aim cross inside eyepiece material - cheepest PETG for printing threads i used 0.11 layers other…
My daughter received a BUKI telecope for christmas so i made this plug to protect the lens of the finderscope. It's my firs print, i hope it'll be helpfull for others.
This simple plate allows you to attach that weird mounting foot of ES 10x60 to existing M4 holes on your GSO RC8. Insert four M4 nuts into the base Chose four M4 screws for them that won't go too far in and damage your scope body. At…
Replacing a lost polar finder top plug from Celestron Advanced VX Mount (AVX). I'm working on restoring a Celestron Advanced VX Mount that is missing many parts and decided to share the models. The rest of the models from this project…
Adapter to finderscope for laser pointer. You have Freecad file if you want to modify diameter of finderscope or laser pointer.
100% infill, needs to be sturdy. 0.12 or adaptive layers prefered. make sure to tighten everything in well and get the camera as far in as it goes in the focuser, I found that you could thread the adapter a bit further in the m42…
I wasn't able to purchase Celestron's part number 51710-3 for my 8" Evolution SCT. I subsequently made my own and the alignments produced were perfect. Calibration data are attached and it uses the same screws as the red dot sight. May or…
That's a very simple model of a solar cover for my telescope's finderscope. External diameter of the finderscope is about 57,5mm, so this design is rather tight fit, but it's quite easy to put on thanks to small internal curbs - visible…
Replacement of lost polar finder cup from Celestron Advanced VX Mount (AVX). I'm working on restoring a Celestron Advanced VX Mount that is missing many parts and decided to share the models. The rest of the models from this project will…
You want to attach an additional guidescope to your scope without drilling new holes? All slots are occupied? Clamps to the rescue! You can't have too many clamps on your telescope. This is very fast and easy to print clamp that can be…
