XT60 Male Panel Mount Socket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple design to help you mount a Male XT60 plug into your next project.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 268
- Wydruki
- 0
- Wyświetlenia
- 1346
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Panel mount pieces for your Standard XT60 male plug.
I have included two different face plates, for button or cap screws and a countersunk version. All screws used are m3.
Plug used for my design is approximately 16.0mm X 8.0mm. The plug I have has a small indent in the side and I have used this feature to help hold the plug tight so check your plugs before you print it.
Included versions of One, two, and four sockets.
The design fits the plug 6mm proud of the mounting surface, face plates I have made are 2mm thick. (4mm thick wall will make the plug flush).
I changed the final stl. slightly before publishing to make it symmetrical so my prints here in grey are slightly different.