1 / 9
Wooden spoon - Knives magician
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Knife holder. The knives levitate.
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 515
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (22)Powiązane
You will need a magnet with a maximum diameter of 10.9mm and a maximum height of 9mm...

(I used three 10x1mm - and it works fine)
You will also need a larger wooden spoon.
There are two versions of the hands
- one with a hole (nail/pin attachment)
- one with a cutout for a wedge

Recommended printing settings
- perimeters: 3
- layer height: 0.15
- infill: 20%
GCODE contains settings for printing and more
- pause print for adding magnet
- fuzzy skin
Pause printing during hand printing. Insert the magnets and then continue printing.
