1 / 9
Wooden spoon - Knives magician
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Knife holder. The knives levitate.
- Rating
- 0 / 5
- Likes
- 44
- Downloads
- 39
- Makes
- 0
- Views
- 515
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
You will need a magnet with a maximum diameter of 10.9mm and a maximum height of 9mm...

(I used three 10x1mm - and it works fine)
You will also need a larger wooden spoon.
There are two versions of the hands
- one with a hole (nail/pin attachment)
- one with a cutout for a wedge

Recommended printing settings
- perimeters: 3
- layer height: 0.15
- infill: 20%
GCODE contains settings for printing and more
- pause print for adding magnet
- fuzzy skin
Pause printing during hand printing. Insert the magnets and then continue printing.
