Counting matching models…
Design with Thinkercad. Holds 6 kitchen knives. Printed in sparky gray Eryone. Layer thickness: 0.2 mm.
Print approx. €17.32–€21.17 excl. taxPreliminary estimate for one variant
Collection of plastic blades I modelled after their real-steel counterparts. Could be used for training g, BUT SOME OF THEM HAVE SHARP POINTS, so use your common sense! I did those mainly for ttrying them out before buying and I saved a…
Print approx. €1.33–€1.62 excl. taxPreliminary estimate for PETGSource material: PET
Dummy 13 Weapon Pack This weapon pack was designed for Dummy 13 and includes a variety of accessories for different character builds and display poses. Included: • Trident • Longsword • Large Knife (need supports) • Small Knife (need…
Hi this is a stencil for be easier to sarpen the lathe knives to a specific angle.
The knives are shorter or longer and they are also rounded or pointed.Three knives should be printed per hand.The strap should be shortened with scissors after putting it on the hand.The knives should be pressed into the clutch, if they…
I have a small thicknessplaner and had the great idea to plane oak endgrain. It worked, but now the knifes a dull. New knives are 25€, sharpening almost free. I looked on the Internet how to sharpen theses blades and i found a cool…
Contenitore impilabile per coltellini svizzeri. I tre inserti sono disegnati per accogliere i vari formati Victorinox e Wenger. Dal piccolo 58mm, fino ai 130mm. All'interno, potete inserire un foglio di feltro per non graffiare i…
This is a model of the Throwing Knives from The Finals. More info, documentation, and source files can be found on Gitlab .
Lathe knives models for education purpose
A simple throwing knife and sheath design, originally designed for cosplayers and Ren Faires. Can be used to chunk at people you don't like. Incudes several variations of the knife and sheath. Didn't like any of the other ones out there…
Modular kitchen knives holder with dovetail joints to easily swap, remove or add new. Does have inset 6x2mm magnet in the blade plate to minimize rattle when opening/closing drawer. There are models for different knife sizes: 21.5mm…
Vase container for Knives in the kitchen. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.48mm Infill: 0%, eg. Vase mode Notes: Printed with 0.8mm nozzle but should be almost as effective with the…
Case for 3-5/8" molder heads and cutting knives. It should be compatible with Shopsmith, Corob, Delta, and Craftsman molder heads and cutting knives, but is only tested with Shopsmith and Corob heads, and Shopsmith, Corob, and Craftsman…
New version of the model 1.1, optimized for easier printing. Game from first episode: keys and knives Support is needed. You can print individual parts and then glue the entire model. I will add photos of the finished product as soon as…
Collection of plastic blades I modelled after their real-steel counterparts. Could be used for training g, BUT SOME OF THEM HAVE SHARP POINTS, so use your common sense! I did those mainly for ttrying them out before buying and I saved a…
Print approx. €1.33–€1.62 excl. taxPreliminary estimate for PETGSource material: PET
I saw that the original needed screws and so, I decided to make it 100% 3D printed using a snap fit design! I also made magnet holes for smaller magnets but you dont need to use magnets at all.
Skadis Carving knives and blades holder
Cutting depth limiter for knives This practical model can be used to limit the cutting depth of knives, making it easy to cut into barbecue sausages. The cutting depth is always 3 mm, so that cutting is precise, quick and easy. All cuts…
Based on Zack Freedman's Gridfinity model. A Gridfinity 1x3 organizer designed to hold two 111 mm knives. Good for storing and protecting knives like the Victorinox Swiss Cheese Master and JJ Barretos in a modular system.
The dual wielded knives of Soshiro Hoshina. These were commissioned by a friend, who then gave me free reign to do whatever I wanted with the files, so I'm posting them online for every cosplayer to use. The blade and hilt pieces slot…
I have just moved over to use the excellent Milwaukee Packout Storage system for my hobby/3D printing room. I am using gridfinity within them for both tools and parts storage. This design takes the smaller exacto knives - I have excel and…
I have just moved over to use the excellent Milwaukee Packout Storage system for my hobby/3D printing room. I am using gridfinity within them for both tools and parts storage. This design fits two of the medium exacto knives and a single…
Knife organizer - 2 knives Two knives of different length. Approximate blade max length 235mm A longer blade may cause the tip of the blade to protrude the knife block. Printing Check infill and top layer slicer settings to have…
STL model is only half, print 2 and adhere together Grab some red ribbon to add on to the look!
Knife organizer - 9 knives Knives of different length. Approximate blade max length 260mm (lower level) / 135mm (upper level) Longer blades may cause the tip of the blades to protrude the knife block. Two versions Tapered end (for tighter…
Passend für 60x120er Schleifsteine. Einfacher zu verwenden, einfach nur waagerecht halten das Messer. Verschiedene Winkel als Vorlage. Unter dem Schleifsteinhalter kann eine Antirutschmatte eingeklebt werden. Ich verwende hier PETG, ist…
Knife organizer - 9 knives - cut version Knives of different length. Approximate blade max length 260mm (lower level) / 135mm (upper level) Longer blades may cause the tip of the blades to protrude the knife block. Two versions (see…
Bring style and organization to your table with the Bon Appétit cutlery holder! This refined and functional design is crafted to hold forks, knives, and spoons, keeping them tidy and ready for use. Perfect for restaurants, formal dinners,…
it will fit right inside the top of that clear bin im planning on filling up with other knives.(see picture) thats why i made it this particular size. let cool before debedding to keep flat Super glue the joints. tape in place to dry. bin…
I made this model using blurry reference photos, so it's probably not completely accurate. The finger notches have a diameter of 0.75 inches, so you might have to resize it to fit your hand. Print Settings Printer Brand: Phrozen Printer:…
Dummy 13 Knives extended blade and resized to 200%
Dummy 13 Knives extended blade and resized to 250%
I really liked the original design but it was to big for my needs so I remixed to only occupy two blocks, I also added another options: 1x6 grid and 1 hole for knives 1x6 grid and 2 holes for knives 2x6 grid and 4 holes for knives 2x6…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Wanted to find a neat way to hold my “big” chef knives instead of creating a huge box for them. printed in Sunlu PLA +, 0.4 nozzle, 4 walls, 2 top and bottom layers.
Print two of each of these parts and fit them together to form a complete tray or knife block. They are symmetrical so you don't need to do anything to the models, just print 2 of them. You can glue the two halves together if you like,…
Belt clip insert for the Tops knives 2.25 in belt clip. Cant find a listing for just the clip only but it is the one that comes with the El Pionero and I suspect that the clip is used on other sheathes. It uses an M2.5 threaded insert and…
Case for 3-5/8" molder heads and cutting knives. It should be compatible with Shopsmith, Corob, Delta, and Craftsman molder heads and cutting knives, but is only tested with Shopsmith and Corob heads, and Shopsmith, Corob, and Craftsman…
All parts stick together with 8x2mm magnets (no need for glue). For carrying the blade's weight I used a 10x2mm magnet on top of the blade pillar. I printed the base with a 10% triangle infill. I added a break in Prusa Slicer directly…
New version of the model 1.1, optimized for easier printing. Game from first episode: keys and knives Support is needed. You can print individual parts and then glue the entire model. I will add photos of the finished product as soon as…
A case for Xacto knives or pens- a remix of Whity's Rugged Box. Insert is made from TPU. Disregard the inlay on the top and the message on the inside. I made this for my daughter's art class and felt that she needed reminders.
Knives holder for the large part of the IKEA UPPDATERA 52x50cm drawer organizer. 8 standard knives on the sides and 4 larger ones in the middle.
These are the flying dragon throwing knives that i used in my recent video about 3D Printed Throwing Weapons, these are functional so be careful!! You can glue them together to make one BIG knife or have 2 knives, they are heavy and big…
The gray wedge shown in the image, placed under the sharpening stone, has a very specific and helpful function: it maintains a consistent sharpening angle , in this case 15° , as marked on the wedge itself. Main Function: It helps keep…
A disassembly jig to easily drill out the rivets on a flat surface. The cutout is for the corkscrew/phillips-screwdriver. Can be used on both sides, but depending on your nozzle and settings you might have to change the diameters on the…
Детали напечатаны без поддержек. НО ЛЕЗВИЕ НАПЕЧАТАНО С ДРЕОДЕВИДНЫМИ ПОДДЕРЖКАМИ, СТИЛЬ АККУРАТНЫЙ! Спасибо!
printed with 2 layers inner/outer walls, 10% infill - seems to be enough
This small 3D-printed model serves as a practical blade snapper for utility knives. With its compact dimensions of 22 × 30 × 10 mm and a weight of just 5.6 g , it’s perfect for everyday carry. The design is compatible with both small and…
Ich habe diese Schutzkappen entworfen, um meine hochwertigen Kochmesser beim Transport zu schützen. Sie schützen sowohl die Schneide des Messers als auch mich selbst. Man stülpt die Kappe einfach über die Schneide und befestigt sie mit…
I made these Wedding cake knive drawings last year and made them on my wood router. I did print one scaled down a little in abs and it looked so I nice I've kept in the office to admire. Hope someone else might find them useful. They need…
Zoey's knives from Kpop Demon Hunters! This listing is for the digital .STL files for you to download and print on your 3D printer at home! Printable on most sized print beds, we recommend resin printing for these files for best results.…
Klappbox zum Aufbewahren von Bastelmessern mit Scharnier und Magnethaltern und Magnetverschluß. Für den Magnetverschluß habe ich 6 Magnete 6 x 2 mm benutzt.…
Good quality throwing knives mainly for adults. Please leave reports and problem so we can all help each other out, Than
Designed to fit two 16,5 cm Kiwi santoku knives. You can get the knives on german Amazon: https://amzn.eu/d/1zTj3sr
Little update : new version of spacers with proper dimensions - previous version was too long, my bad. Has your EDC knife collection grown? Are you running out of space on your shelf? That's why I've designed a simple tower-style stand…
Inserts for Knives Out, including cute little box for your knives with a sword on top
Hello everyone! This time, I am presenting a knife stand that you can show off. If you have knives in your collection that are worth showing off, this model will be perfect for you. I have prepared a version for displaying one knife for…
Same instructions as for original model, it was mirrored to accommodate two more knives.
I created this for use at work to provide a safer way to snap off Olfa blades and collect the sharps for disposal at the same time. There are two for the most common blade sizes: 18mm 25mm
I saw that the original needed screws and so, I decided to make it 100% 3D printed using a snap fit design! I also made magnet holes for smaller magnets but you dont need to use magnets at all.
Basic Microtech talons logo I threw together. Prints with standard profiles. Adjust size and settings to your likings.
Jon Snow – Steak Knives Holder Bust This bust represents Jon Snow, inspired by his iconic appearance in the well-known television series, and more specifically by the tragic moment when he is betrayed and stabbed. The facial expression…
The sheaths that come with the Morakniv straight knives is pretty terrible. You can replace the stock sheaths with these. Grab some waxed thread for leather sewing and some leather sewing needles and sew the three parts together with a…
I have a messy knife drawer, so I made an organizer for it. It can hold: 2 really big knives, up to 360mm 2 kinda big knives, up to 324mm 12 steak knives and similar, up to 242mm 2 paring knives, up to 185mm This is printable on a…
This is my Female Rogue With Knives . This model was made for a fellow Patron of MZ4250 ( Thingiverse , Printables ) who requested it on the discord server that is available for every Patreon tier. A remix of a model made by MZ4250 (…
I wanted a tighter packing of knives in my drawer, so I remodeled the blocks to allow 4 knives in two Gridfinity Columns, and then I also created a steak knife holder to hold 6 knives in 3 columns. I like the layout better as they work…
Standard 1/4" hex bit driver. Category: Hand Tools
This is a wrench to remove the thumb stud on Strider Knives, specifically the older models: GB, AR, RC, etc. They are used instead of a pliers, as that would scratch or mar the metal of the thumb stud. Category: Hand Tools
This is a little tool for the pivot screw of the Coast-Knives' FX352. Coast-Knives is using a screw with a 5-point head for the pivot joint. To adjust the knife's folding mechanism you need a special tool. For the tool you need five steel…
Hi! I used this model since a year in my kitchen :) Everything is still strong as new and perfectly integrated in my drawer. I needed a knives organizer as some of the blades are pretty sharp. My drawer had few compartments to store our…
I love my knives being sharp and organized. But we all have different amount and sizes in our drawers, so I made a spreadsheet to help! You need to use Freecad, it's free and easy to setup :) When in it, you will find a spreadsheet called…
The Holder for kitchen utensils and knives consist of two parts. They must not be glued together, as this will make cleaning difficult. It was designed for a Bürster Premio Life caravan, but has been redesigned for more general use.
You will need a magnet with a maximum diameter of 10.9mm and a maximum height of 9mm... (I used three 10x1mm - and it works fine) You will also need a larger wooden spoon. There are two versions of the hands one with a hole (nail/pin…
Moderní design držáku čtyř kuchyňských nožů/ Modern design of the holder of four kitchen knives Kuchyňský držák nožů s lehkou údržbou. Kitchen knife holder with easy maintenance. Stojan/ Stand Tento držák kuchyňských nožů je velmi…
Heyho, this is the template/jig I created after quite a few moments, taking measurements, printing prototypes and creating waste :D To make your own custom scale you need: 1 x This Jig Set 1 x Drilling machine (best with a stand) with a 5…
A set of knives inspired by Metro 2033 series suitable for LARP games. Print instructions Print all knives with black flexible filament, Flexfill 98a is a good choice. However, if you have softer filament, try to use it instead. You need…
This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. The throwing knife has…
Print at 0.2mm layers. Angle is for one bevel, total angle is reading*2.
the print will give you the perfect sharpening jig in order to cut things right. here the video how I makes it : https://www.youtube.com/watch?v=6mM7BnwuB_s
Kitchen Knives Holder 3 part design Total dimensions 480x165x70mm Holds 9 knives
Don't forget to like, and to donate if you really enjoy the file. :) Plastic toy knives for food practice or clay/Playdoh. Pictured knives are printed at 75% scale. For play or training with soft foods or clays like Playdoh. Use under…
Bigger Knives Remix of Knives Tray for Minimalist Knife Block.
I found it very difficult to unscrew the cutting knives from the blender jar of my Philips HR2195/08 blender for cleaning since there is not much place to get a good grip. With this tool, you can add a solid lever to the mechanism to…
Designed some simple knife scabbards for a Juvale Cleaver, and for a Dexter 8 inch Chinese style Chef knife. OpenSCAD source code is included. I printed mine out of PLA+, but I would probably recommend using PETG
Unfortunately, the set does not include a blade protector. Therefore I have designed the covers myself. The models shown are printed with Extrudr Durapro ASA neon orange. I recommend in any case to use a technical filament like ABS or…
I created a replacement part for my Olfa utility knife's stripped screw holes on the slider. According to Olfa's website , this part is called Slider Parts C. Print settings: Filament: PETG Layer height: 0.15mm Supports: No Perimeters: 3…
This is just a hack to fit chefs knives to the Bloody Knife Holder model. I'm not sure if they're going to live on it very often, so I designed this quick hack rather than modifying the original. Original work:…
Mount for Gerber EAB (Exchange-a-Blade) folding utility knife. Fits both Original and Lite versions of the Gerber EAB knives. https://www.amazon.com/dp/B002RILCLY/ Includes slot for integrated 6x20x2mm magnet (optional) to retain the…
I designed this model for myself to keep some EDC items organized and I figured I would share. This is the maximum size my Mini+ could print. It's 180x180mm. Wallet is a Herschel Charlie. Raycon E85, Leatherman Skeletool, Milwaukee 6-in-1…
Cutco Knife Co. Plastic Organizer for Steak Knives 2159 Tray to hold 4 (#2159) Steak Knives Protect your Cutco from dulling and damage that can occur when stored loose in drawers.
Cutco Knife Knife Block add on for Steak Knives 2159 Lets you use 3M Command Strips (Large Velcro kind) to place your knives onto the back of many standard knife blocks.
This is an organizer/holder for six Zwilling J.A. Henckels steak knives to keep them organized and safely stored.
These are throwing knives so you can go stealth in airsoft. I printed them with high strength resin. I used black and clear. When I took them off the printer they were kinda sharp so I sanded them down a bit.
Two tones because I ran out of filament mid print… tired of using cups that would get knocked over / tip over. should fit on most regular sized printers, might need to print at an angle to fit.
I thought the Assassins Knives on Thingiverse were so cool, and I saw some people doing frames, but no one had the stl for them, so I made one myself. This is designed to be a simple manual color swap using layer pause, and can be thrown…
