CRK Chris Reeve Knives Sebenza Custom Scale Jig template
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Heyho, this is the template/jig I created after quite a few moments, taking measurements, printing prototypes and…
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 107
- Makes
- 0
- Views
- 1,304
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Heyho,
this is the template/jig I created after quite a few moments, taking measurements, printing prototypes and creating waste :D
To make your own custom scale you need:
1 x This Jig Set
1 x Drilling machine (best with a stand) with a 5 mm drill & a countersink
X x Sanding paper (Coarse to fine!)
1 x Flat underground
Some good 2K Glue
1 X Material (3,8 mm Carbon plate or about 2 mm Carbon plate + some wood)
Building instructions: https://youtu.be/MJ3hNro4NOU
I would recommend using hard & temperature resistant materials like ASA for the template. If you print them in PLA the drill might heat it up and increase the produced tolerances.
I used 100% infill.
Disclaimer: As with every other modification to your original CRK this will void your guaranty!