CRK Chris Reeve Knives Sebenza Custom Scale Jig template
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heyho, this is the template/jig I created after quite a few moments, taking measurements, printing prototypes and…
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 1304
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Heyho,
this is the template/jig I created after quite a few moments, taking measurements, printing prototypes and creating waste :D
To make your own custom scale you need:
1 x This Jig Set
1 x Drilling machine (best with a stand) with a 5 mm drill & a countersink
X x Sanding paper (Coarse to fine!)
1 x Flat underground
Some good 2K Glue
1 X Material (3,8 mm Carbon plate or about 2 mm Carbon plate + some wood)
Building instructions: https://youtu.be/MJ3hNro4NOU
I would recommend using hard & temperature resistant materials like ASA for the template. If you print them in PLA the drill might heat it up and increase the produced tolerances.
I used 100% infill.
Disclaimer: As with every other modification to your original CRK this will void your guaranty!