water meter - AI on the edge - esp32-cam
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
another lightweight bracket for a water meter mount. => see jomjol => see AI on the edge
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 1746
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
another lightweight bracket for a water meter. I designed it to fit the belgian watermeters (elster v100)
Esp32-cam has to be mounted using a ziptie (one day I'll adapt to use the housing from jomjol).
Two LED holes are available, allthough I am not using them for now
I also included an image of my watermeter (please note the cable mess… pulsecounter and then some…)
Extra information/credits:
https://github.com/jomjol/AI-on-the-edge-device/wiki
https://github.com/jomjol/water-meter-system-complete
https://www.thingiverse.com/thing:4573481
edit 20220901: added led strip compatible bracket, as I wanted to experiment with removing glare
edit 20220917: rotated the led strip bracket, first attempt '(see 20220901 edit) failed miserably. Glare is not gone completely, but manageable through settings. There is room for 3 leds, but 3 is definetely too much. 2x 3 leds is even more overkill.