36 modeli
compatible with: only for Sensus 620 Watermeter only for ESP32 CAM with integrated Micro USB features: 360° rotatable top part (easy adjustments) ESP32 Cam can slide on top part (easy adjustments) use a sheet of paper on the LED slot to…
Simple design to mount an inductive proximity sensor on your Elster V200 Watermeter. The sensor used is a “M12 DC 5V NPN NO LJ12A3-4-Z/BX-5V 300mA” sensor working on 5 volt. It triggers on the little red wheel in your watermeter and will…
This is a simple mount to attach an ESP32cam to my watermeter. The mount itself is a simple friction fit, the parts can be joined by gluing or using screws. I used threaded inserts to properly attach the screws. I provide all my models…
Changed the holes to work with M3 and made the Tubus work with M3 Threaded Insert (M3x5mmx4mm). the ring is now open to deal with covers on some watermeters. The ESP housing is change a bit to better fit a ESP32-Cam with MB Supports not…
Simple design to mount an inductive proximity sensor on your Elster V200 Watermeter. The sensor used is a “M18 DC 5V NPN NO LJ18A3-4-Z/BX-5V 300mA” sensor working on 5 volt. It triggers on the little red wheel in your watermeter and will…
Remixed body that fits Sensus S420CLUA watermeter model and ESPBox that fits ESP32-CAM with ESP32-CAM-MB board with microusb port for power.
Watersensor enclosure. Fits on the Sensus 620 watermeter as used in the Netherlands. Includes holder for an ESP8266. This is a remix of the “P1 Monitor watermeter ZTATZ sensor mount” by Sp4wN on Thingyverse. I added the ESP8266 enclosure.…
Sensor holder for Unimag Itron watermeter. It is for a 12mm inductive proximity sensor(12A3-4-Z/BX-5V). I printed it with PETG. I'am still testing, my sensor is NOT working at this moment in my case. I have also added a sensor holder for…
The software that you need on the camera to recognize the count, may you install very easy with crome (ff is not working) on this site: https://jomjol.github.io/AI-on-the-edge-device/index.html
Printing Settings Layer Height 0.2mm PLA works great 15% Infill Supports recommended This model is updated after first print and shown on photo's.
Simple design to mount an inductive proximity sensor on your Elster V200 Watermeter Type 8212. The sensor used is a “M18 DC 5V NPN NO LJ18A3-4-Z/BX-5V 300mA” sensor working on 5 volt. It triggers on the little red wheel in your watermeter…
The case is intended to fix an ESP32-CAM module with a camera on an Axioma Watermeter. On the ESP the open source software AI-on-the edge is operated. See GitHub https://github.com/jomjol/AI-on-the-edge-device . The ESP32 can connect to…
A mounting-System with variable lenght and angle. For use with Elster-meters. For use with the “AI on the edge”-Project. I used the following ESP32-Cam:…
This adapter can be plugged on top of a Sensus 420 water meter. You can then insert an optical detector inside of the "tower" and it will read the rotating silver-red ring. With help of an Arduino or a similar device you can get your…
This is a simple mount to attach an ESP32-CAM module to a watermeter unit (this one is quite standard here in Czech Republic). I made this while I was building an AI on the Edge powered device to monitor our water consumption. This mount…
I made another case for using an espcam to read watermeter values using AI on the edge. Why? The other cases would not fit my watermeter. Mine is roughly 77mm on the top side and it has a lid with a hinge. My adaptor ist 76,5mm so it fits…
This is a housing for an ESP32-cam to use with the open source AI-on-the-edge watermeter solution. I designed it as I had a lot problems with reflections in the camera picture. The outer housing was printed in matte white PLA, to act as a…
I made this model to have a perfect fixed position for my water meter gateway sensor on my Elster/Honeywell v200 water meter. There comes a holder with the gateway but it is one size fits all and I found it hard to have it in the right…
This ESP32 CAM holder is perfect for the use in combination with Ai on the edge.
Remix of the base, compatible with B Meters / Spewa water meter
Do you have a Kamstrut flowIQ 2200 and want to make it smart? Then this model is a good option! Simple, easy do assemble and mount on top of your existing system without a hustle! Used hardware for mounting: 4pc M3 hex screw 4pc Hex M3x8…
Simple case for AI on the edge watermeter using ESP32Cam. See documentation . I fixed the baseplate with double-sided tape on top of the watermeter.
ESP Water meter enclosure using : 1 ESP8266 Wemos d1 mini pro 2 capacitors 100nF 1 oled panel Electronic hardware on https://www.openhardware.io/view/766/ESP-WaterMeter Print instructions Unassociated tags: fumée bleue Category:…
Homewizard WiFi Watermeter Halterung für Zenner Wasserzähler
For reading the pulses generated by our watermeter I have designed a lid which can replace the original lid. A IR Pulse reader (TCRT5000) is mounted on top of the lid. 2xM3 bolts are required to mount. The IR Reader can be adjusted for…
A bracket for the NPN/PNP sensor to measure your water usage.
This model is for belgian DH Metering counter from SWDE. This model is compatible with technic bricks. I used a technic brick compatible camera housing https://www.thingiverse.com/thing:6449062
Support for "Wifi Water Meter" module to be fixed on a "Magdalena" water meter (Walloon Region, Belgium). Easily printed with PLA at 0.3mm height, with supports.
Mount an esp32 camera module on a "Topas Sonic" water meter to read the value with "AI on the edge" for "Home Assistant"
Remixed Stibbons design (https://www.thingiverse.com/thing:4778435) with a 3 or 4 layer (using 0.2mm layer height), diffuser for the LED to prevent reflection on the watermeter. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts:…
This adapter can be put / or screwed on (for horizontal mounting) sanibel comfort watermeters and fits the remixed AI on the Edge Watermeter holder perfectly.
Axioma, or Heiland in Germany, is a digital water meter with a flat display. In this case, the flash is too bright and f
I have a smartgateways water meter sensor, it has to be quite exactly on the right spot to detect the spinning wheel. This model keeps it in place on my particular meter (from Vitens, the model of the meter is (I think) KIWA Sensus 620).…
ESP32 Cam Digitizer - AI on the edge - Watermeter, for Diehl Auriga Watermeter. Pleksi Cover mount with Tape, 3D Print "locks" that You can push it down and up for Camera Focus. Then U can tighten with the cable binder. To Setup Focus on…
Case for watermeter readings with ESP32-Cam. For Diehl Corona MW. Maybe also for similar watermeters. The case is fixed on the watermeter with cable ties. The two lower parts are glued together. A 3d printed spring is glued into the top…
Do you have a Kamstrut flowIQ 2200 and want to make it smart? Then this model is a good option! Simple, easy do assemble and mount on top of your existing system without a hustle! Used hardware for mounting: 4pc M3 hex screw 4pc Hex M3x8…
