Yamaha Waverunner VX1100 jet pump wedge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 1,5 degree jet pump wedge meant to be installed between the pump housing and the nozzle of the Yamaha VX1100…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 461
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 1,5 degree jet pump wedge meant to be installed between the pump housing and the nozzle of the Yamaha VX1100 in order to trim the front of the waverunner up a bit out of the water. It fits the pump very well but it must be installed using longer bolts than stock.
Disclaimer: I've never tried it myself as i sold the ski before getting longer bolts so ride safe and use it at your own risk.
I recommend printing it using PETG or similar at a high temperature for good layer adhesion, no fan, 100 concentric infill. Do not use PLA as it is unsuitable due to the poor creep properties and material degradation.
Category: Sport & Outdoors