Yamaha Waverunner VX1100 jet pump wedge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 1,5 degree jet pump wedge meant to be installed between the pump housing and the nozzle of the Yamaha VX1100…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 52
- Makes
- 0
- Views
- 461
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
This is a 1,5 degree jet pump wedge meant to be installed between the pump housing and the nozzle of the Yamaha VX1100 in order to trim the front of the waverunner up a bit out of the water. It fits the pump very well but it must be installed using longer bolts than stock.
Disclaimer: I've never tried it myself as i sold the ski before getting longer bolts so ride safe and use it at your own risk.
I recommend printing it using PETG or similar at a high temperature for good layer adhesion, no fan, 100 concentric infill. Do not use PLA as it is unsuitable due to the poor creep properties and material degradation.
Category: Sport & Outdoors